Direct Access to Primary Source Data via Browser Extension

A browser extension gives you direct access to primary source data when it sits next to the page you are already reading and takes you to the original record: the filing, the dataset, the paper, the ownership register entry. For company research, the strongest version is an extension tied to a structured company database, so one click on any website opens verified firmographics, ownership, financials, risk and growth signals with their sources attached. That is what Milda’s browser extension, part of a platform covering over 420 million companies and 50 million verified contacts, is built to do.
This guide explains what counts as primary source data, what the main kinds of extensions actually retrieve, how to verify what they surface, and where access, privacy and reuse limits apply.
TL;DR
- Primary source data is firsthand material: filings, patents, technical reports, original datasets. Whether a document is primary can depend on the question you ask of it.
- Extensions fall into three groups: open-access finders, library-access tools and company-record tools. Only the last group serves business, investment and market work.
- Every record an extension surfaces should be checked for source, date, completeness and version before it goes into a memo or a model.
- Extensions run with elevated browser privileges, so permissions, data handling and request volume matter as much as coverage.
- Milda puts company intelligence in the browser, with ownership, financials, risk and signals on one record, so the verification step starts from a source-linked profile instead of a blank search.
Table of Contents
- What counts as primary source data
- What a browser extension actually does
- Why public filings alone are not a full answer
- How to verify what an extension shows you
- Limits to check before you rely on any extension
- Which kind of extension fits which reader
- Milda in the browser
- A repeatable workflow for a deal or partner scout
- FAQ
- Sources
What counts as primary source data
Primary sources are generally firsthand accounts or materials produced from direct experience or observation. Secondary sources sit at least one step away and analyze or synthesize the primary ones. The same guide makes a point that matters for business work: a document’s status depends partly on the question being asked. A press article is secondary when you study a merger and primary when you study how the press covered it.
In scientific and technical work, University of Connecticut librarians note that primary articles present new data, methods and results, while reviews interpret earlier research. Peer review alone does not make an article primary. Virginia Commonwealth University’s library guide lists experimental data, laboratory notes, conference proceedings, technical reports and patents among primary materials.
For a corporate reader, the working list is shorter and more practical:
- Regulatory filings and annual reports
- Shareholder and ownership registers
- Patents and technical reports
- Trade and customs records
- Company announcements and the company’s own website
A database or a news summary built from these is secondary. It is still useful, as long as it points back to the original and you can check it.
What a browser extension actually does
An extension reads the page you have open, recognizes an identifier (a DOI, a company name, a domain, a filing number) and fetches something related from another source. That gives you three families of tools, with very different jobs.
Open-access finders
These detect a scholarly article and look for a legal free copy. Unpaywall’s metadata includes the DOI, publication date, publisher, open-access status, repository and publisher locations, license, update dates, landing-page and PDF URLs, and content versions. CORE Discovery searches CORE and external scholarly sources for freely accessible copies, including items with no DOI. If your work is academic literature, this is the family you need.
Library-access tools
These connect the page to a subscription your institution already pays for. LibKey Nomad’s technical FAQ says it identifies the DOI, compares it with institutional holdings, checks open-access and repository versions, and may route you to a link resolver or document delivery. A 2020 article on Lean Library describes a similar flow: check holdings, send you through authentication to subscribed content, and fall back to open versions or document delivery. These help only if you sit inside an institution with a library.
If you want a broader view of the extensions researchers use to retrieve firsthand material, this overview of browser extension tools for researchers is a place to compare approaches.
Company-record tools
This is the family that matters to deal teams, analysts, business development and strategy officials. The question is rarely “where is the PDF of this paper?” It is “who owns this company, what do its numbers say, who decides there, and what changed recently?” The primary data lives in registers, filings, patent offices and trade records across many countries, in many formats. An extension that resolves the website you are on to a structured company record saves the manual hunt across all of them.

Why public filings alone are not a full answer
In the United States, the best-known primary source for listed companies is EDGAR. The SEC states that EDGAR filings are publicly accessible and downloadable for free, and that its indexes identify company name, form type, CIK (the SEC’s company identifier), filing date and filename.
That is excellent for public companies, and it shows two things worth knowing:
- Freshness has a schedule. The SEC says current-business-day indexes are updated nightly, and submissions after the daily cutoffs may appear on the next business day. A result on screen is not necessarily a real-time, complete record.
- Scope stops at the jurisdiction. EDGAR does not cover a private supplier in Poland, a subsidiary chain across three registers, or a startup that has never filed anything. Most of the companies a partnership scout or investor wants to see are of that kind.
This is where a multi-source company platform earns its place. Milda covers over 420 million companies and brings together firmographics, ownership and shareholders, financials, risk assessments, trade data, patents, publications and event-driven growth signals. You see them on one profile instead of in a dozen tabs. You can see the breadth of the dataset on the data coverage page.
How to verify what an extension shows you
An extension makes retrieval faster. It does not make a record true, current or complete. Run the same five checks every time a figure will drive a decision.
- Find the original. Every claim should trace to a named source: a register, a filing, a patent number. If the tool gives you a number without a source, treat it as a lead, not a fact.
- Read the date. Check when the underlying document was filed and when the tool last refreshed it. These are different dates. The SEC’s nightly index cycle is a reminder that even official systems have lag.
- Check completeness. Is this the full filing, a summary, or one page? Scanned documents in particular can be read incompletely by software, so look at the document itself when a figure is critical.
- Confirm the version. Preprints, amended filings and restated accounts exist. Make sure the version you cite is the one you mean.
- Cross-check one key fact. For contacts and ownership especially, confirm with a second independent source before outreach or a term sheet. Our guide to finding decision makers and verifying them with a second source shows this routine step by step.
The point of a source-verified platform is that steps 1 to 3 start done for you: the record carries its provenance, and you spend your time on judgment rather than on hunting.
Limits to check before you rely on any extension
Extensions are powerful because they run inside your browser. That is also why they deserve scrutiny.
Privileges and privacy
A University of California San Diego study, The Most Dangerous Code in the Browser, reports that extensions run with elevated privileges, and it found that over 71% of the top 500 Chrome extensions could trivially leak user data from any site. The study dates from 2015, but the lesson holds: ask which sites an extension can read, what it sends out, and where it sends it. Your corporate IT or security team should approve any extension on a work machine, particularly when you browse confidential deal targets.
Chromium itself documents content-hash verification for extensions, including whether an extension comes from the Chrome Web Store. Installing from an official store, with a named publisher and a clear data policy, is the baseline.
For contact data, privacy law applies as well. Milda describes its platform as GDPR-compliant, with source-verified data, which matters when your team contacts decision makers in Europe.

Access rights
An extension cannot give you what you have no right to. Paywalled documents open only through an institutional subscription or an open version. Licensed data stays within the license your organization holds. Read the terms before you export or redistribute anything.
Request volume
If you or your team script requests to a public source, follow its rules. The SEC’s fair-access guidance asks for efficient automated access, limited to what you need, within a current maximum of 10 requests per second. It may limit excessive requests and does not allow botnets. Downloading only what you need is both polite and faster.
Citations and reproducibility
A finding you cannot reproduce is a finding nobody will trust in a committee. Save the source reference, the retrieval date and the document version along with every figure. Teams that do this in a shared place can rerun an analysis months later and see exactly what changed.
Which kind of extension fits which reader
| Your job | What you need | Type of tool |
|---|---|---|
| Reading academic literature | Free or licensed full text | Open-access finder or library-access tool |
| Checking one listed US company | The filing itself | The regulator’s own search, then your reading |
| Sourcing deals, partners or customers across countries | Ownership, financials, risk and contacts for private and public firms | Company intelligence platform with a browser extension |
| Mapping a market or industry for policy | Coverage across many firms and sectors, with signals | Company intelligence platform with search and API |
The first two rows are well served by free or institutional tools. The last two need breadth and structure, which is what a company data platform provides.
Milda in the browser
Milda is a subscription platform delivered as a web app, a browser extension and an API, so the same data reaches you where you work: in a browser tab while you read a company’s site, in a research session, or inside your own systems. The offers are Browser Analyst, Strategy Terminal and Data Solutions, and the pricing page shows how they fit different team needs.
What you get on a company record:
- Firmographics, ownership and shareholders
- Financial insights and risk assessments
- Trade data, patents and publications
- Event-driven growth signals and competitor mapping
- Verified contacts for the people who decide
Milda’s own position is that its proprietary and multi-source data surfaces up to three times more companies than other tools, with firm-level insight, technology portfolios and real-time signals that are source-verified.

Teams use it in different ways. Business development teams work from the sales and GTM research use case, analysts from market research, and investors from private equity and VC. To see how a record reads, open a sample such as the TRENDEX profile overview.
A repeatable workflow for a deal or partner scout
Here is how a team can run source-first research in a single session:
- Define the question: for example, “mid-size logistics firms with patent activity and a recent ownership change.”
- Search the platform to build the list, then open each record from the company’s own website using the extension.
- Read ownership, financials and risk on the profile, and note the source and date for each figure you will use.
- Check one critical fact against a second independent source.
- Pull the verified contact for the decision maker and record where the contact came from.
- Log everything in your shared file: source, retrieval date, version. Anyone can then reproduce the result.
The discipline in steps 3 to 6 is what makes the result defensible. The platform shortens steps 1 and 2 from hours to minutes.
Our view: primary data, one click away
The real cost in company research is not finding a number. It is knowing where it came from, how old it is and whether it fits the question you are asking. Teams lose days jumping between registers, filings and websites, and then lose confidence because the trail is broken.
We built Milda so the trail stays attached. Over 420 million companies and 50 million verified contacts sit behind one record, with ownership, financials, risk, trade data, patents and growth signals in the same place. Our patented technology is designed to keep the datasets accurate, and the browser extension puts that record next to whatever page you are reading.
We think the best research habit is simple: start from a source-linked profile, verify the fact that matters with a second source, and write down where everything came from. A tool should make that habit easy, not optional.
Vilius Stanciauskas, Founder and CEO
FAQ
Is a browser extension a primary source?
No. An extension is a tool for reaching sources. What it opens may be primary, such as a filing or a patent, or secondary, such as a summary. Check what the document itself is, because status can depend on the question you are asking.
Can an extension give me real-time company data?
Only as fresh as its sources. Even the SEC notes that EDGAR indexes update nightly and late submissions may appear the next business day. Look at the date of the underlying document and the date of the last refresh, and treat signals as prompts to verify.
Is it safe to install a research extension on a work computer?
It can be, with care. Extensions run with elevated privileges, and a UCSD study found many popular ones could leak user data. Install only from an official store, review permissions, and get approval from your security team before using one with confidential targets.
How is a company intelligence extension different from an open-access finder?
Open-access finders locate free copies of scholarly articles by DOI. A company intelligence extension resolves a company website to a structured record with ownership, financials, risk and contacts. They answer different questions, and business teams need the second kind.
Sources
- OpenStax: Introducing Research and Research Evidence
- University of Connecticut: Primary and Secondary Sources
- VCU Libraries: Primary and Review Scientific Scholarly Articles
- Unpaywall metadata overview (roadoi vignette)
- CORE Discovery
- LibKey Nomad Technical FAQ
- Lean Library article, 2020
- SEC: Accessing EDGAR Data
- The Most Dangerous Code in the Browser, UCSD
- Chromium content verifier delegate